Rule of JAS Standard DARI SALAH SATU PERUSAHAAN YANG BERGERAK DI BIDANG KAYU LAPIS (PLYWOOD)
Juni 15, 2012 Tinggalkan komentar
1.Bonding strength Test
1.a. The sample divides into two parts, which have the bonding test at the mill Lab and MAL (Mutu Agung Lestari).
1.b.If the inspector found delamination in ripping test by hand, the inspector has to take 1 sheet of the additional sample for the laboratory and MAL.
1.c. The bonding strength test shall conform to JAS Standard.
2.Standard of Judgement
Consecutive boiling test (Repetition boiling test):
|Rate of pass||Judg|
|More than 90%||PASS||Pulling strength, wood destructive rate|
|Less than 70%||NG|
|More than 70%, less than 90%||Re-test||Result re-test more than 90% then pass, less than 90% then NG|
Hope usefull.. 🙂